My Blog

Posts for tag: porcelain veneers

By McLean Dental Care
January 08, 2019
Category: Dental Procedures
Tags: porcelain veneers  
ANewVeneerwithMinimalorNoToothAlteration

Dental veneers, thin layers of porcelain bonded to chipped, stained or slightly crooked teeth, are an effective and affordable way to transform your smile. Their color, translucence and shape blend so well with the rest of your teeth that it's often difficult to tell them apart.

But traditional veneers have one drawback: although they're less than a millimeter in width, they can still appear bulky on unprepared teeth. To help them look more natural, we often have to remove some of the enamel layer from the tooth surface. Enamel doesn't grow back, so this alteration is permanent and the prepared teeth will require a restoration from then on.

But you may be able to avoid this—or at least keep the alteration to a minimum—with no-prep or minimal-prep veneers, two new exciting choices in cosmetic dentistry. About the width of a contact lens, we can bond these much thinner veneers to teeth with virtually no preparation at all or, in the case of a minimal-prep veneer, needing only an abrasive tool to reshape and remove only a tiny bit of the enamel.

These ultra thin veneers are best for teeth with healthy enamel, and can be placed in as few as two appointments. And besides being less invasive, the procedure is reversible—we can remove them and you can return to your original look without any follow-up restoration. One caveat, though: because of the strong bonding process used, it's not always easy to remove them.

Although their thinness makes it possible to avoid or minimize alterations, there are some dental situations like oversized teeth that may still require extensive tooth preparation. With some poor bites (malocclusions) orthodontic treatment to straighten the teeth may also be needed first.

All in all, though, no-prep or minimal-prep veneers could help you avoid the permanent tooth alteration that usually accompanies their thicker cousins. What's more, you'll have the beautiful, transformed smile that veneers can achieve.

If you would like more information on minimal or no-prep veneers, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “No-Prep Porcelain Veneers.”

NewMaterialsAddStrengthtoVeneersBeautifulLife-Likeness

With exciting innovations in cosmetic dentistry over the last few decades, we can now transform nearly any unattractive smile. One of the best and most cost-effective of these is the porcelain veneer. These thin layers of dental porcelain are bonded over the front of chipped, slightly misaligned or stained teeth to create an entirely new look.

Veneers have evolved over time, especially with the materials they contain that give them their beauty and life-likeness. The first veneers were made mainly of feldspathic porcelain, a mineral composition known for its similarity in color and translucence to natural teeth.

But because this early porcelain had a high amount of silica (in essence, glass), and because they were created through overlaying several thin layers that weren’t as strong as a single piece, they were prone to shattering. This made them problematic for teeth subject to heavy biting forces or patients with clenching or grinding habits.

The situation changed dramatically in the 1990s, when dental labs began adding Leucite, a sturdier glass-like mineral that didn’t diminish the porcelain’s translucence. Not only did Leucite make veneers more shatter-resistant, it also enabled dental technicians to fashion most of the veneer in one piece to further strengthen it.

More recent veneers may now incorporate an even stronger material called lithium disilicate. Because lithium disilicate has twice the strength of Leucite, veneers made with it can be as thin as 0.3 millimeters. Not only does this blend together the most desirable qualities expected of a veneer—strength, aesthetic appeal and easy fabrication—it allows for a broader range of situations and uses.

Both of these materials can be pressed or milled to assume the exact shape necessary to fit a particular tooth. The manufacturing process also allows for creating smaller veneers that can then be overlaid with porcelain for the most life-like appearance possible.

Thanks to these stronger materials enhancing the natural beauty of porcelain, we now have a wider creative palate for transforming your smile.  

If you would like more information on porcelain veneers, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “Porcelain Veneers: Your Smile—Better Than Ever.”

ANo-PrepVeneerCouldEliminatetheNeedtoRemoveToothEnamel

Porcelain veneers are one of the best ways to transform your teeth’s appearance with only a small amount of tooth preparation. But even that small amount could leave a veneered tooth permanently altered.

As the name implies, veneers are thin layers of custom-designed porcelain bonded to the outside of a tooth to cover defects. They’re usually ideal for minor chipping, staining or even slight tooth misalignments. But although they’re thin—often just a millimeter or so in thickness—they can still make a tooth appear or feel bulky.

To reduce this extra width, we usually need to remove some of the tooth’s surface enamel. Since enamel doesn’t replenish itself, this alteration could mean the tooth will require a restoration from then on.

But now, you may be able to take advantage of new advances in this popular restoration: No-Prep or Minimal Prep veneers that involve little to no tooth alteration. In most cases they’re simply bonded to the teeth with only slight enamel reshaping.

Because of their ultra-thinness, No-Prep veneers (usually between 0.3 to 0.5 mm, as thin as a contact lens) are bonded directly to teeth that are practically untouched beforehand. A Minimal Prep veneer usually requires only enamel reshaping with an abrasive tool before it’s placed. And unlike traditional veneers, they can often be removed if needed to return the teeth to their original form without another restoration.

These new veneers are best for people with small teeth, often from wear due to teeth grinding, narrow smiles (the side teeth aren’t visible while smiling), or slightly misshapen teeth like underdeveloped teeth that can appear peg-shaped. But people with oversized teeth, some malocclusions (bad bites) or similar dental situations may still require enamel removal to avoid bulkiness even with ultra-thin veneers.

If you don’t have those kinds of issues and your teeth are reasonably healthy, we can apply No-Prep or Minimal Prep veneers in as few as two appointments. The result could be life-changing as you gain a new smile you’re more than happy to share.

If you would like more information on no-prep veneers, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor article “No-Prep Porcelain Veneers.”

PorcelainVeneersALessInvasiveWaytoTransformYourSmile

There are a number of ways to improve unsightly teeth. You can, of course, replace them with dental implants — but not if they're still viable. You can crown them: however, you'll have to significantly reduce their structure for the crowns to fit over them.

There is another less invasive option for teeth with mild to moderate imperfections — you can cover them with porcelain veneers. As the name implies, a veneer is a thin covering of dental porcelain bonded to the outside surface of a tooth. They literally put a “new face” on chipped, stained or slightly gapped teeth.

You'll first need a dental examination to ensure your teeth are reasonably healthy and that you don't have any significant dental problems that could interfere with the veneers. We can then design your veneers' shape and color to achieve the look you desire. We can also create a temporary “trial smile” with acrylic replicas of your proposed veneers to give you a realistic impression of your future smile.

The next step is the possibility the teeth need to be prepared for the veneers. Although quite thin, veneers can still make the teeth look larger or bulky. To compensate, we remove some of the tooth enamel. Although much less than for a crown, this alteration is still permanent: your teeth will need some form of restoration from now on. There are also “no-prep” veneers, which require no tooth surface reduction.  Ask us if this is an option.

We then make an impression of the teeth, which with other information will guide a technician at a dental laboratory to manually create your new veneers. This can take several weeks and requires a high degree of artistry to produce a custom product that will match your teeth.

Once they've arrived, we'll use a permanent bonding process to precisely attach them to your teeth.  It will then be up to you to care for your veneers, especially not biting down on anything hard that could chip or crack them. You should also maintain regular dental visits and proper oral hygiene to keep your smile as bright and attractive as possible.

Although small in size, veneers can make a big impression. They can restore the smile you once had — or give you the look you've always wanted.

If you would like more information on porcelain veneers, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “Porcelain Veneers: Strength & Beauty as Never Before.”

VeneersanAffordableLowImpactWaytoAchieveaMoreAttractiveSmile

There are a lot of ways to improve the appearance of your teeth. Some methods can be quite involved like crowns or bridgework, which require extensive alteration of teeth to accommodate them.

Other methods, though, can achieve stunning results with less tooth reduction or alteration to your teeth. Porcelain veneers are one such alternative that literally puts a new face on your teeth. A dental veneer is a thin layer of restorative material (usually porcelain) that is bonded to the outside of a tooth to cover blemishes. They’re an excellent choice for dealing with otherwise healthy teeth with mild to moderate chipping, wearing, staining or slight misalignment.

Veneers can be fashioned to match the shape and texture of the prepared tooth, as well as coloring that blends with neighboring teeth. They’re created by skilled dental lab technicians who use porcelain powder mixed with water to create layers of pliable porcelain laminated together to achieve the appropriate thickness and shape. The veneer is then oven-fired to produce a strong, durable product.

Their use in various dental situations does require some tooth preparation, though normally not as much as other restorative measures — usually no more than 0.5 mm of surface enamel. Removing this small amount will ensure the veneer doesn’t look too thick and bulky once bonded to the tooth.

There are some situations, though, where veneers aren’t the best choice: because they’re mainly a cosmetic solution, they can’t remedy problems like poor tooth position and bite or large discrepancies in root position. And teeth that are heavily decayed may require more extensive dental work to repair and preserve them.

In the right situation, though, veneers can make a huge difference to your smile and last for years, as long as you practice effective oral hygiene and don’t subject them to abnormal biting force (no cracking hard shell nuts with them — they can shatter). In skilled hands, veneers can transform your teeth from embarrassing to dazzling.

If you would like more information on porcelain veneers, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “Smile Design Enhanced with Porcelain Veneers.”